IPF XT8.14

  • Model: IPF XT8.14
  • Shipping Weight: 11lbs

Starting at: $584.35
Sale: $321.39
Save: 45% off

Please Choose:

Unloader Valve - MiniMatic 4/B









Add to Cart:
The AR North America XT8.14N features a 24mm solid shaft, operates at 1450 RPM, and has a max PSI of 2000.
Max Flow (in GPM): 2.11
Max Flow (in L/Min): 8
Max Pressure (in PSI): 2000
Max Bar: 140
Power EBHP: 3
Bore Dia: 15mm
Stroke: 11mm
Crankshaft ID Stamp: 6
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid

Replaces the following:
Hawk Model #: HC170 (D)
Max Flow (in GPM): 2.2
Max Pressure (in PSI): 1750
Pump Speed (in RPM): 1450
Shaft Diameter: 18mm, Solid
Hawk Model #: HC200AR (ST)
Max Flow (in GPM): 2.1
Max Pressure (in PSI): 1500
Pump Speed (in RPM): 1450
Shaft Diameter:
Comet Model #: LW2020-S
Max Flow (in GPM): 2.1
Max Pressure (in PSI): 2000
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid
General Pump Model #: T731B (2 cyl)
Max Flow (in GPM): 2.2
Max Pressure (in PSI): 1200
Pump Speed (in RPM): 1450
Shaft Diameter: 24mm, Solid

Click Here for Product Data Sheet (PDF)
Click Here for Parts Breakdown Diagram of this pump (PDF)

Kits available for this pump:
Rail Kit, 3/8"
Rail Kit, 1-1/2"
Viton® Water Seals
High Temp Kit, up to 180┬░
Repair Kit, Valves
Repair Kit, Pistons
Repair Kit, Water Seals
Repair Kit, Oil Seals

Special Note: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps.

Copyright © 2018 IndustrialPartFinder.com. Powered by Zen Cart