The IPF XMASS3G10N features a 24mm solid shaft, operates at 1750 RPM, and has a max PSI of 2000.
Max Flow (in GPM): 3.0
Max Flow (in L/Min): 11.4
Max Pressure (in PSI): 2000
Max Bar: 140
Power EBHP: 4.12
Bore Dia: 15mm
Stroke: 13.2mm
Crankshaft ID Stamp: 3
Pump Speed (in RPM): 1750
Shaft Diameter: 24mm, solid
Click Here for Product Data Sheet (PDF)
Click Here for Parts Breakdown Diagram of this pump (PDF)
Kits available for this pump:
Repair Kit, Valves
Repair Kit, Pistons
Repair Kit, Water Seals
Repair Kit, Oil Seals
Repair Kit, Support Rings
Special Note: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps.
No other oil is factory approved for these pumps.
